Table of Contents
Advertisement
Available languages
Available languages
How to use
Preparation
1.
Let the end of the hose insert into the air intake socket until clicking position.
2.
After using, press the button and drag the end of the hose out.
3.
Fit the extension tube to the handle, tube to floor brush as showing in the picture.
Using the machine
1. Pull the wire to suitable length.
2. Insert the plug into power socket. Then place the speed control button on MIN, press the switch
to run the machine. The vacuum cleaner begins to work.
3. The part, which can adjust wind volume, is on the handle. The speed control button can adjust
the power.
Note: Don't extend the cable beyond the RED mark.
EN
2
Advertisement
Table of Contents
