Symbols Used In The Manual - Crown CT21075HMX-2 Original Instructions Manual

be more secure than holding the workpiece with your
hands�
• Considering that asbestos may cause cancer,
asbestos - containing materials shall not be
processed�
• The power tool could be put down only after the
parts of power tool is completely static� Accessory
on the power tool might be clamped during work,
which may make it difficult for you to control the
power tool�
• Appropriate detector shall be used to find the
location of hidden power wires� Or you should obtain
relevant information from local power supply unit�
Drilling electric wires will cause fire and electric
shock� Damaged gas pipe will cause exploration� If
water pipes are punctured, damage will be caused to
property�
• In case a accessory installed on the power tool
is clamped, you shall shut down the power tool and
stay calm� At that time, the power tool will produce
extremely high reactive torque thus resulting in return
stroke� The accessory installed on the power tool are
likely to be clamped, for example: hypercharge of
power tool or skewing of accessory installed on the
power tool during work�
• If hidden electric wires or power lines of the
power tool itself might be cut off during work, you
must hold the insulated handle to operate the power
tool� When the power tool is in touch with a charged
line, the metal parts on the power tool will conduct
electricity and may cause the operator to get an
electric shock�
• During work, you must tightly hold the power tool
and ensure you stand firmly. You should hold the
power tool with your hands�
• When operating and using the power tool, you can
only hold switch position of the main handle rather than
other parts�
• Avoid stopping an power tool motor when loaded�
• Never remove any chips or fragments with your
power tool's motor running�
• Use accessories without defects - it will make work-
ing with the power tool easier�
• The modification of the drill bits design and the use
of removable orifices and accessories not envisaged
for this power tool is strictly forbidden�
• Do not apply excessive pressure when operating the
power tool - it can jam the drill bit and overload the
engine�
• Do not allow drill bits to jam in the material pro-
cessed� If this occurs, do not try to release them by
means of the power tool engine� This can put the pow-
er tool out of order�
• Striking out drill bits jammed in the material pro-
cessed with a hammer or other objects is strictly for-
bidden - metal fragments can hurt both the operator
and the people nearby�
• Avoid overheating your power tool, when using it for
a long time�

Symbols used in the manual

Following symbols are used in the operation manual,
please remember their meanings� Correct interpreta-
tion of the symbols will allow correct and safe use of
the power tool�
Symbol
min
English
Autogoods "130"
30
Meaning
Cordless impact drill /
screwdriver
Cordless drill / screw-
driver
Sections marked gray - soft
grip (with insulated surface)�
Serial number sticker:
CT ��� - model;
XX - date of manufacture;
XXXXXXX - serial number�
Read all safety regulations
and instructions�
Wear safety goggles�
Wear ear protectors�
Wear a dust mask�
Do not heat the battery
above 45°C� Protect from
prolonged exposure to direct
sunlight�
Do not dispose of the battery
in a domestic waste con-
tainer�
Do not dispose of the battery
in the fire.
Protect the battery from the
rain�
Battery charging time�
Movement direction�
Rotation direction�