8
Model / Article
Maximum power, h.p.
Engine displacement, cm3
Engine type
Tank volume for automatic chain
lubrication, ml
Fuel tank volume, ml
Fuel type
Primer
Guide bar length cm
Chain pitch, inches
Number of chain links, pcs.
Groove width, mm
Dimensions L × W × H, cm
Weight, kg
Sound power level, no more, dB (A)
Sound pressure level at the workplace
(70 cm), no more, dB (A)
Unpacking
At the time of purchase, the chainsaw is handed over to the buyer in a cardboard transport container, inside
which special protective elements are provided that provide protection during transportation.
To remove the tool from the packaging, remove the packing tape, open the box and carefully remove the
accessories.
ATTENTION!
After unpacking and transporting, always check the equipment and the technical condition
of the product.
It is recommended to save the packaging materials in case of transport.
Assembly requirements
Before starting the chain saw for the first time, it is necessary to mount the guide bar and chain, adjust the
chain, fill with fuel mixture and add oil to the tank for chain lubrication.
Attention! Do not turn on the chainsaw until it is fully prepared for operation.
Before using the device, carefully read this manual. Pay particular attention to safety regulations. This guide is
a reference tool and guide for device operation and provides general information on the assembly, operation
and maintenance of chainsaws.
Installing guide bar and saw chain
ATTENTION!
Always wear protective gloves when working with the chain.
GASOLINE CHAIN SAW
TECHNICAL CHARACTERISTICS
GCS-4540 / 952027
WORK RULES
GCS-5245 / 952047
2,9
45
2-stroke, air-cooled
Unleaded regular gasoline + oil for 2-stroke engines
40
0,325
64
51 × 26 × 27
12,2
GCS-5850 / 952067
3,4
4,0
52
260
550
yes
45
72
1,5
12,6
13,0
110
105
58
50
76