Components; Safety Requirements - MTX 952027 User Manual

4
1
1. Gasoline chain saw (saw and cover with chain
brake) – 1 pc.
2. Guide bar – 1 pc.
3. Guide bar cover – 1 pc.
ATTENTION!
Please, read this manual before use and retain for future reference.
For safety reasons, persons under 16 years of age, as well as persons who are not familiar with this manual,
should not be allowed to work with the device.
The product is not intended for use by persons with limited physical or mental abilities or in the absence of
the user's experience and knowledge, unless he is under control and instructed on the use of the device by
the person responsible for safety. This saw is intended for infrequent use in the household, e.g., for trimming
branches or sawing firewood. Despite the fact that the chainsaw is equipped with an anti-vibration system,
excessively long continuous operation with it can cause disturbances in the blood circulation of the operator's
hands due to vibrations. Do not operate or maintain the device while in a state of alcoholic, narcotic intoxication
or under the influence of potent medications.
The user operating and maintaining the device must have the appropriate knowledge and skills.
Product repairs and maintenance operations not described in this manual must be carried out by an authorized
service center.
ATTENTION!
All maintenance and repair work must be carried out with the device turned off.
It is necessary to use spare parts and components only of the manufacturer, this will ensure the reliability and
safety of operation of the product. When using components and parts by other producers, the manufacturer
shall not be responsible for the resulting consequences. Before start working, check the device for damage. Do
not use a damaged device. Defective parts should be repaired by a service center or replaced.
Do not use this device near flammable materials or sources of fire. Do not use the device near other people or
animals.
Some elements of the device become very hot during operation and remain hot for a while after the motor is
stopped. To prevent serious burns, avoid touching the hot parts of the device!
Use the product in accordance with the intended use and environmental conditions specified in the manual.
Do not change the design of the device! This can cause equipment failure and various injuries.
GASOLINE CHAIN SAW

COMPONENTS

2

SAFETY REQUIREMENTS

3 4
4. Chain – 1 pc.
5. Container for mixture preparation
6. Tool kit
7. User manual
5
7
6