Table of Contents
Advertisement
2
Installing the Nokia IP1200 Series
Appliance
This chapter describes how to install the Nokia IP1200 Series appliance. The following topics
are discussed:
Rack Mounting the Appliance
Before You Begin
Caution
To help guard against electrostatic discharge damage, make sure you are properly
grounded by using a grounding wrist strap and following the instructions provided with
the wrist strap before you handle the components or open the appliance. The
grounding plug on the front of the appliance (shown in
chassis grounding point If you do not have a grounding wrist strap, make sure you are
properly grounded before you touch any electronic component.
Rack Mounting the Appliance
The Nokia IP1200 Series appliance mounts in a standard 19-inch equipment rack with four
mounting screws, as
Note
To avoid damaging your equipment, Nokia recommends that you use all four rack-mounting
bolts when you install your appliance on the rack.
IP1220 and IP1260 Security Platforms Installation Guide
All manuals and user guides at all-guides.com
Figure 9
shows.
Figure 1
on page 20) provides a
33
Advertisement
Table of Contents
