Direct Transmission; Manual Number Dialling (Direct Transmission) - Panasonic 403171 Operating Instructions Manual

Sending Documents

Direct Transmission

If your machine's memory is full or you wish to send the document immediately, use Direct Transmission.

Manual Number Dialling (Direct Transmission)

To dial the telephone number manually, follow the steps below.
Make sure that the FAX lamp is ON. If not, press
1
a
1
b
2
Make sure that the lamp goes off.
3
Enter a telephone number from the keypad.
Ex:
5 5 5 1 2 3 4
4
Your machine starts to dial the telephone number.
(see Note 1) (see Note 2) (see Note 3)
NOTE
1. If you need a special access number to get an outside line, dial it first then press
(represented by a "-") before dialling the full number.
Ex
: 9 PAUSE 5551234
2. To stop the transmission, press
The display shows:
COMMUNICATION STOP?
1:YES 2:NO
1
Press to stop the transmission. The Communication Journal will not print out regardless of the printout mode
setting of the Communication Journal.
3. This field (AUTO, Line-1 or Line-2) appears only when the 2nd G3 Fax Communication Port Kit is installed.
Place original(s) face up on the ADF.
or
Place a book or an original face down on the
Platen Glass.
STOP .
BASIC OPERATIONS
to select the "FAX MODE".
ENTER STATION(S)
THEN PRESS START 00%
ENTER STATION
THEN PRESS START 00%
TEL NO.
5551234
* DIALLING *
5551234
Note3
(AUTO)
PAUSE
to enter a pause
47