Panasonic 403171 Operating Instructions Manual page 31

Customizing Your Machine
No. Parameter
017 RECEIVE MODE
022 SUBSTITUTE RCV
024 PRINT REDUCTION
025 REDUCTION RATIO
026 POLLING PASSWORD
027 POLLED FILE SAVE
028 STAMP AT MEM. XMT
031 INCOMPLETE FILE
SAVE
033 XMT REDUCTION
037 RCV TO MEMORY
042 CONF. POLLED FILE
SAVE
043 PASSWORD-XMT
044 PASSWORD-RCV
046 SELECT RCV
048 TELEPHONE LINE
049 PSTN ACCESS
CODE
Continued on the next page...
PROGRAMMING YOUR MACHINE
Setting
Setting
Number
1 Manual Setting the reception mode to automatic or manual.
2 Auto
1 Invalid Selecting whether the machine receives to memory when the
recording paper runs out, toner runs out or the recording paper is
2 Valid jammed.
1 Fixed Selecting the print reduction mode.
Fixed: Reduce received document according to setting of
2 Auto
Auto: Reduce received document according to the length of
70 70% Selecting the fixed print reduction ratio from 70% to 100%. This
parameter functions only when the fixed print reduction is selected
---- ----
on Fax Parameter No. 24.
100 100%
(----) Setting a 4-digit password for secured polling. (See page 73)
1 Invalid Selecting whether the machine retains the polled document(s) in
memory even after the document(s) is polled once.
2 Valid
1 Invalid Selecting whether the machine stamps the originals when storing
into memory.
2 Valid
(depending on the Stamp setting on the Control Panel)
1 Invalid Selecting whether the machine retains the document in memory if
it is not successfully transmitted.
2 Valid
1 Invalid Selecting whether the machine performs reduction when the
transmitting original is wider than the recording paper used at the
2 Valid
receiving machine.
Enter a 4-digit password for printing the received document(s) in
memory by using F8-5 (RCV TO MEMORY).
(----)
When F8-5 (RCV TO MEMORY) is set to ON, this parameter is not
selectable on the LCD display. (See page 93)
1 Invalid Selecting whether the machine saves the confidential polled file
even after the file is polled once.
2 Valid
1 Off Setting a 4-digit XMT-Password and selecting whether the
machine performs and checks the XMT-Password of the receiving
2 On
station when transmitting.
1 Off Setting a 4-digit RCV-Password and selecting whether the
machine performs and checks the RCV-Password of the
2 On
transmitting station when receiving. (See page 112)
1 Invalid Selecting whether the machine performs selective reception.
(See page 109)
2 Valid
1 PSTN Selecting the type of line connected.
2 PBX
(----) Setting PSTN Access Code. (max. 4 digits)
Comments
Parameter No. 25.
received originals.
(See page 111)
29