Direct Transmission; Manual Number Dialling (Direct Transmission) - Panasonic DP-150FP Operating Instructions Manual

Sending Documents

Direct Transmission

If your machine's memory is full or you wish to send the
document immediately, use Direct Transmission.
(To use Direct Transmission, you must change the Fax
Parameter No. 05 (MEMORY) setting to "OFF" in advance.
(See page 37 and Note 1 below)
(see Note 1)

Manual Number Dialling (Direct Transmission)

To dial the telephone number manually, follow the steps below.
Make sure that the FAX Mode indicator is ON. If not, press
1
a
1
b
2
Enter a telephone number from the keypad.
Ex:
5 5 5 1 2 3 4
3
START
Your machine starts to dial the telephone number.
NOTE
1. After the Direct Transmission is completed, reset the Fax Parameter No. 05 (MEMORY) setting to "ON" (factory
default position).
Set the original(s) face up on the ADF.
Place a book or an original face down on the
Platen Glass.
abc..
- +
FAX
to select the "FAX MODE".
FAX
ENTER STATION
12-OCT-2000 15:00
PRESS START TO DIAL
5551234❚
1 2 3
4 5 6
7 8 9
0
START
00%
53