Basic Operations; Loading Originals; How To Load Originals; Sending Non-Standard Size Originals - Panasonic 403171 Operating Instructions Manual

Basic Operations

Loading Originals

How To Load Originals

1. On the ADF / Inverting ADF
• Place the original(s) Face Up on the ADF until the
leading edge placed into the machine stops.

Sending Non-Standard Size Originals

When transmitting
document(s), the machine may perform
Rotate Transmission automatically and not
transmit the portion of the document that
exceeds the standard size ("P" portion).
(See Note 1)

Flatbed Scanning

When a book or an original is placed on the Platen Glass, the message "ANOTHER ORIGINAL?" is shown
on the LCD display when
• If you wish to store another page, press
• If is pressed, the machine starts to dial the telephone number.
NO
(see Note 1)
NOTE
1. When an oversized original is sent to another machine, sometimes, it is reduced in accordance with the other
party's recording paper size.
Face Up
Original Size
Guide
non-standard size
Direction
is pressed and the scanning is completed.
START
YES
and place another original, then press
EX:
A3 size
2. On the Platen Glass
• Place a book or an original Face Down on the
Platen Glass, aligning it with the arrow mark on
the original size guides.
Rotation XMT
P
The part which
protrudes from the
Fixed size is not sent.
A4 size
Face Down
Original Size
Guide
.
START
33