Table of Contents
Advertisement
1.2 Functional Specifications
Item
Operating power supply
Target OS
Target host machine
Host interface
Target interface
Target interface power supply
Supervisor
Temperature characteristics
Storage temperature
Item
Target device
Target system clock supply method
Target system clock range
Target interface voltage
Interface for flash programming
Interface for reset
Interface for detection of target
power supply
Interface for mode setting and
communications interface
CHAPTER 1 GENERAL
Table 1-1. Product Specifications
5 V power supply via USB cable
Maximum current consumption: 500 mA
Since the maximum current consumption is 500 mA, be sure to use a self-powered hub
when using a USB hub.
TM
Windows
98, Windows Me, Windows 2000, or Windows XP
TM
PC-98NX Series, IBM PC/AT
Mini B connector for USB2.0 (USB1.1 compatible)
Interface connector (10 pins) for QB-78K0MINI
Connection cable for QB-78K0MINI
Connector unit: HIF3BA-10D-2.54R (made by Hirose Electric) or equivalent product
Wiring: FLEX-S4 (10) -7/0.127 2651P (made by Oki Electric) or equivalent product
Recommended sockets on target device
Straight: HIF3FC-10PA-2.54DSA (made by Hirose Electric Co., Ltd.) or equivalent
product
Right angle: HIF3FC-10PA-2.54DS (made by Hirose Electric Co., Ltd.) or equivalent
product
Power is supplied from target device
Standard current consumption: 8 mA
(excludes power consumption by target circuit)
V850ES/KG1, 20 MHz operation
0 to 40°C
−15 to 60°C (no condensation)
Table 1-2. Target Interface Specifications
78K/0 Series incorporating on-chip debug unit
Can be supplied from an oscillator or oscillation circuit mounted on this product, or default 5
MHz clock can be supplied from within the emulator
Same frequency as specified for the target device
Note 1
2.0 to 5.5 V
This is required when the target device contains flash memory.
No. of interface signals: 1
Interface signal functions (in and out relative to direction from target device)
• FLMD0 (in): Used when writing from the integrated debugger to flash memory
No. of interface signals: 1
Interface signal functions (in and out relative to direction from target device)
• RESET (in), RESET(out): System reset
Monitors target system's power supply
Be sure to supply V
for on-chip debugging
DD
• V
(in): V
for on-chip debugging
DD
DD
Select X1 or X2, or select PORT A or B
User's Manual U17029EJ3V0UM
Specification
compatible
Specification
Note 1
Note 2
9
Advertisement
Table of Contents
