Table of Contents
Advertisement
The QB-78K0MINI is an emulator that connects to a target device that includes an on-chip debug unit and is used
to efficiently debug both hardware and software.
1.1 Features
Enables general-purpose use on any microcontroller that includes a 78K/0 Series on-chip debug unit
Enables debugging when mounted on a microcontroller installed on a system under development
Communication method uses X1 and X2 (also enables communications that use port pins other than X1 and
X2)
Uses flash self-programming function to enable downloading of programs to flash memory
Does not require an external power supply (power is supplied via the USB bus)
Host interface is USB2.0 compliant
Enables maintenance using auto diagnostic program and self-check board
The QB-78K0MINI's shape dimensions are described below
Pseudo real-time RAM monitor and DMM functions
External dimension
Weight
8
CHAPTER 1 GENERAL
Item
Height
26.1 mm
Width
56.5 mm
Depth
84.5 mm (when including screws: 88.5 mm)
Approximately 60 g
Figure 1-1. External Dimensions of QB-78K0MINI
User's Manual U17029EJ3V0UM
Value
84.5 mm (when including screws: 88.5 mm)
26.1 mm
56.5 mm
Advertisement
Table of Contents
