Table of Contents
Advertisement
Front Panel
8. DC IN 12V
DC in socket connects the supplied 12V PSU.
The connection can be secured by screwing
the outer fastening ring of the DC In plug to
the socket.
9. Power Switch
Turns the device ON/OFF
10. Grounding Terminal
When connecting this unit to any other
component, make sure that it is properly
grounded by connecting this terminal to an
appropriate point. When connecting, use the
socket and be sure to use wire with a cross-
sectional area of at least 1.0 mm
5
4
1. Power
Press and hold for about 2 seconds to boot
the device.
2. Channel Buttons 1/2/3/4
Press to switch the input source for the PGM
output (HDMI Input 1/2/3/4)
10
3
2
.
2
1
Advertisement
Table of Contents
