Table of Contents
Advertisement
4. Tally Output Port
The Tally Output Port sends Red, and Green
tally signals to each channel.
Red indicates On-Air, and Green indicates
next camera source. Tally output port can
connect other Datavideo peripheral devices
such as ITC-100, ITC-200, AM-100 or other
monitor models, allowing the peripheral
device to communicate with the SE-500MU
4K or send tally signal to be displayed on the
monitor.
See
Appendix 1
for Tally pinout.
5. RS-232 Port
A remote control interface allowing the user
to connect the SE-500MU 4K to a remote PC
or a custom remote controller.
See
Appendix 2
for more information about
this port.
6. DVIP Port
This port allows the SE-500MU 4K to establish
direct connection with the PC or an Ethernet
switch or router.
7. PGM OUT Upgrade / FW Upgrade
Connects USB drive for FW upgrade.
Contact your local Datavideo Office or dealer
for further advice.
9
Advertisement
Table of Contents
