Panasonic GM1 Series User Manual page 98

10.5 Adding and Setting up Servo Amplifiers
● You can also set any desired value after logging in by selecting the configured station alias
value.
Enter any desired value in the input field and click the [Write to Eeprom] button.
When you log in again after restarting the servo amplifier, the value entered in the input field
is set as the station alias value.
If you log in for the first time after selecting the "Configured station alias" option, station alias
value inconsistency will occur, causing the device name of the servo amplifier in the
navigator pane to be grayed out.
10-14 WUME-GM1ETCSU-01