Advertisement
20 EU DECLARATION OF CONFORMITY
In compliance with EU's Machinery Directive 2006/42/EC and
Directive2004/108/EC.
Manufacturer
Represented by
Hereby certifies that Lifting trolley Newton 50 - 250
Serial No.
__________________
Article No.
Order No.
__________________
has been manufactured in accordance with Directive 2004/108/EC on electromagnetic
compatibility and Directive 2006/42/EC on the approximation of the laws of the Member
States relating to machinery.
The relevant parts of the following harmonised standards have been observed in design
and manufacture:
ISO 12100:2010
ISO 3691-5:2009
ISO 13857:2008
EN 349+A1:2008
EN 1175-1+A1:2008
ÖDESHÖG
9th November 2011
AB Hallins Verkstäder
Box 24, SE-599 21 ÖDESHÖG
SWEDEN
Tel.: 0144-153 00
Fax: 0144-314 00
E-mail:
support@hallins.com
___________________________
___________________________
Company
___________________________
Address 1
___________________________
Address 2
___________________________
Address 3
Tel.: _______________________
Fax.: _______________________
Newton 50
H17152
Newton 70
H14931
Newton 100 H14152
Newton 150 H151185
Newton 250 H18594
Safety of machinery - General principles for design – Risk
assessment and risk reduction
Industrial trucks – Safety requirements and verification –
Part 5: Pedestrian-propelled trucks
Safety of machinery – Safety distances to prevent hazard zones
being reached by upper and lower limbs
Safety of machinery – Minimum gaps to avoid crushing of parts of
the human body
Safety of industrial trucks – Electrical requirements –
Part 1: General requirements for battery powered trucks
H19862
H15177
H15182
H151187
H151188
H19238
Tommy Hallin, CEO
38
Advertisement
Chapters
