Advertisement
Note that the max. load implies an evenly distributed load over the whole load bed surface
for the basic version of the lifting trolley. Point loads not permitted.
Permitted load combinations – with standard load bed
NOTE! NOTE! Other lifting devices may be fitted,
affecting the load capacity,
see Chapter 15 Accessories.
Newton 50
LO ADIN G DIAG RAM
60
50
40
30
20
10
0
Safety of Industrial Standard SS-EN 3691-5:2009 the basic requirement for load
distribution is:
100 % of the rated load spread over the entire surface of the platform.
The centre of gravity of the load is assumed to be in the centre of the platform.
Lateral forces not permitted.
Newton 50
Distance from mast (D) = max 225 mm.
Centre of gravity (D) height above load bed.
= max 225 mm.
Sideways on, it is assumed that the load (Q1) is
centrally placed on the load bed and distributed over it.
Newton 70/100/150/250
Distance from mast (D) = max 250 mm.
Centre of gravity (D) height above load bed
= max 250 mm
Sideways on, it is assumed that the load (Q1) is
Centrally placed on the load bed and distributed over it.
D ISTA N C E "D " (mm )
Newton 70/100/150/250
LOA D DIA GRA M NEW TON 70 - 250
300
250
200
150
100
50
0
6
D ISTA N C E "D " (mm)
Advertisement
Chapters
