Table of Contents
Advertisement
Quick Links
STEERING SYSTEMS
MECHANICAL CONTROLS
INSTALLER: THESE INSTRUCTIONS CONTAIN IMPORTANT SAFETY INFORMATION
Pro-Pedal Electronic Throttle
EN
Installation Manual . . . . . . . . . . . . . . . . . . . . .2
WARNING
Cancer and Reproductive Harm
www.P65Warnings.ca.gov
AND MUST BE FORWARDED TO MARINE CRAFT OWNER.
FT7000SEP
REVISION 0 Form No. IS-FT7000SEP 02/22 | ©2022 Dometic Corporation
Advertisement
Table of Contents
Related Manuals for Dometic FT7000SEP
Summary of Contents for Dometic FT7000SEP
- Page 1 Pro-Pedal Electronic Throttle Installation Manual .....2 WARNING Cancer and Reproductive Harm www.P65Warnings.ca.gov REVISION 0 Form No. IS-FT7000SEP 02/22 | ©2022 Dometic Corporation...
-
Page 2: Table Of Contents
Safety Instructions documentation, may be subject to changes and updates. For up-to- date product information, please visit www.dometic.com. This manual has safety information and instructions to Contents help you eliminate or reduce the risk of accidents and injuries. -
Page 3: Supplemental Directives
This section provides general information about the – American Boat and Yacht Council (ABYC) engine control and its components. Dometic recommends the installation and use of an 1.4 General Safety Messages emergency ignition interrupt switch. This switch should be connected by a cord to the boat driver. Should the... -
Page 4: Component Dimensions
(155 mm) 1 Front Mount Engine Control Dimensions 3.3 Tools and Materials 4 Preinstallation Dometic recommends that the following tools and WARNING: ELECTRIC SHOCK HAZARD. materials be used while installing the engine control. Failure to obey these warnings could result in death or serious injury. -
Page 5: Determining The Wiring Harness Length
Pro-Pedal Electronic Throttle Installation • Do not bundle the wiring harness together with Use the mounting template to cut and drill the required electrical wiring. mounting openings. See “Mounting Template” on page 10. • Do not rest the wiring harness against sharp edges that could cause chafing. -
Page 6: Connecting The Wiring Harness To The Engine
Adjusting the Engine Control Pro-Pedal Electronic Throttle The wiring harness should be installed on the engine control prior to mounting. 1. If using a slide mount, do the following: a. Screw the slide mount securely to the deck of the boat in the preselected mounting location. -
Page 7: Slide Mount Adjustment
Pro-Pedal Electronic Throttle Adjusting the Engine Control 6.1 Slide Mount Adjustment 6.2 Wide Open Throttle End Stop Adjustment This section describes how to adjust the slide mount to allow the pedal to be comfortably operated by different This section describes how to adjust the wide open people. -
Page 8: Torsion Spring Adjustment
• Do not cover cracks in a cable with tape or other sealants. Doing so may cause the cable to fail without warning. • Use only Dometic replacement parts and components that are specifically approved for use with the product. -
Page 9: Disposal
9 Warranty Information LIMITED TWO-YEAR WARRANTY AVAILABLE AT WWW.SEASTARSOLUTIONS.COM/SUPPORT-2/ WARRANTY-2/SEASTAR-SOLUTIONS-WARRANTY. IF YOU HAVE QUESTIONS, OR TO OBTAIN A COPY OF THE LIMITED WARRANTY FREE OF CHARGE, CONTACT: DOMETIC CORPORATION: SEASTAR SOLUTIONS 640 NORTH LEWIS ROAD LIMERICK, PENNSYLVANIA 19468 1-610-495-7011 TS.MECHANICAL@DOMETIC.COM... -
Page 10: Mounting Template
Mounting Template Pro-Pedal Electronic Throttle 10 Mounting Template NOTICE: The following template is provided for informational purposes and is not to scale. Check all the dimensions before cutting or drilling. 3.9 in. (99 mm) 1.3 in. (33 mm) 4.1 in. 6.0 in. (104 mm) 5.6 in. (152 mm) (142 mm) 2.7 in. - Page 11 Pro-Pedal Electronic Throttle...
- Page 12 CONTACT US dometic.com/en-us/terms-and-conditions-consumer/contact-us A complete list of Dometic companies, which comprise the Dometic Group, can be found in the public filings of: DOMETIC GROUP AB Hemvärnsgatan 15 SE-17154 Solna Sweden...