2.1
Operator Controls and Indicators
The printer is equipped with 2 status indicators and 2 operator controls to allow the operator to know the
status of the printer at all times. The status indicators are:
•
The front bezel light
•
The STATUS and ERROR LEDs on the keypad
The operator controls for the printer are:
•
The FEED key
•
The platen release lever
Figure 2-1 below illustrates the location of these controls and displays. The purpose of this section is to
detail the operation of the printer around these displays and controls.
UM-STO-C Revision C
2
OPERATOR INTERFACE
Paper insertion slot
INDEX MARK SIDE UP
Paper advance
Figure 2-1
Operators and Technicians
Manual
PSA-66-001N
PSA-66-ST
Platen release
Operator Controls
Error! light
Status light
7