Hitch And Frame Installation - Briggs & Stratton 1695776 Operator's Manual

Hitch and Frame Assembly
1. Slide the 5/16-18 speed nut (A, Figure 6) onto rear frame
support (E) through square hole (C) so that the threaded
side (B) is on the inside of support.
2. Install the 5/16-18 shoulder bolt (D) as shown.
3. Repeat on the other side.
E
Figure 6
4. Slide the hitch (A, Figure 7) onto the right and left shoul-
der bolts (B) of the rear frame support (C) as shown .
B
C
Figure 7
B A
Figure 8
C
D
A
B
Figure 9
7
5. Install the bag and cover support (A, Figure 8) to upright
support (B) using four 3/8-16 x .875 bolts (C) and four
3/8-16 whiz locknuts (D) as shown.
D
6. Attach cover assembly (B, Figure 9) to cover support
bracket (A) using hinge pivots (C). Secure cover using
hinge pins (D) and hair pins (E) as shown.
A
Assembly
A C
B
B
C D
E