Collector Removal; Storage - Briggs & Stratton 1695776 Operator's Manual

Collector Removal

: Operation Without Bagger
CAUTION
For operation without bagger, the mower deflector MUST
be properly installed in the down position and retained by
the spring latch.
1. Lift up cover (A, Figure 16), then remove and empty bags
(B).
2. Remove hitch and frame assembly (C) from rear of
tractor.
3. Loosen middle tube strap from lower chute (D) and
remove middle / upper tube assembly (E).
4. Lift discharge deflector (F). Rotate latch (G) upward on
front of lower chute.
5. Remove mounting strap (H) from rear bracket (I) and
pull lower chute away from mower.
6. Remove baffle (J).

Storage

Storing The Grass Catcher
Clean the grass catcher thoroughly using a mild detergent
(other products may damage the tube). Remove any debris
from the screen on the underside of the lid.
If paint has been scratched on metal parts, touch up with
paint, or apply a thin film of oil to prevent corrosion.
Store in a dry area. Dry thoroughly before storing for a long
period of time. Always store away from moisture.
A
E
D
H
G
J
Figure 16
13
Operation
B
C
F
I