Troubleshooting
Operation
Symptom
Cannot turn the power on.
Cannot perform operation from
an ROP connected with an IP
connection.
● Is the power cable connected to the outlet properly?
● Is the power on?
• If the [POWER] lamp of this unit is off, the power of this unit is not turned on.
● Is a valid IP address set on the unit?
● Is the unit you want to operate selected correctly?
● Is the ROP connected correctly?
• Also refer to the operating instructions for the ROP.
● The version of the ROP may need to be upgraded to enable support for the unit.
• Consult your dealer.
- 54 -
Cause and Measure
Troubleshooting