Panasonic AK-HCU250P Operating Manual page 57

[MIC1] and [MIC2] connectors (page 21: 4)
HA16RV-3PG(76) (Hirose Electric Co., Ltd.)
Pin No.
1 SHIELD
2 HOT
3 COLD
● When connecting to an unbalanced input terminal of an external device, connect to it as shown in the diagram below.
1 : Ground (Shield)
2 : Hot (+Ve)
3 : Cold (-Ve)
● Some commercially available conversion connectors and conversion cables have pin 3 shorted to pin 1.
Using such a conversion connector or conversion cable will cause a failure.
NG
Function
CCU→SYSTEM
CCU→SYSTEM
XLR connector
2
1
3
Be sure to open pin 3.
2
1
3
Do not use a conversion connector or conversion cable
on which pin 3 is shorted to pin 1.
Flow of signal
0 dBm, 600 Ω
PIN connector
(unbalanced input connector)
- 57 -
Reference
Remarks