Table of Contents
Advertisement
To connect to a computer using the CASSIOPEIA USB cable
Important
Before connecting your CASSIOPEIA to a computer, make sure you first install
the PC Connect software on your computer. Use the steps below to connect the
CASSIOPEIA to your computer when prompted to do so during the software
installation procedure.
1. Plug the USB cable into the USB port of your computer.
2. Turn off your CASSIOPEIA.
3. Connect the other end of the USB cable to your CASSIOPEIA.
Using the CASSIOPEIA Serial Cable
You can use the CASSIOPEIA serial cable to connect the CASSIOPEIA directly to a
computer.
Important
• Be sure to turn off the CASSIOPEIA and your computer before connecting the
CASSIOPEIA.
• See "Required System Configuration" on page 24 for the computer system that is
required for direct serial connection.
• The illustration below is just one possible connection configuration. The location and
layout of serial ports vary from computer to computer. See the documentation that
comes with your computer for full details on connecting cables to it.
• You must have PC Connect software installed on your computer in order to exchange
data with the CASSIOPEIA over a serial connection. See the Quick Start Guide for
information about how to install PC Connect, and PC Connect online help for
information about how to use it.
USB port
23
CASSIOPEIA USB cable
Advertisement
Table of Contents
