Using A Pc Card Unit; To Connect Your Cassiopeia To The Pc Card Unit - Casio CASSIOPEIA Getting Started

Using a PC Card Unit

Connecting your CASSIOPEIA to an optional PC Card Unit (JK-865PU) makes it
possible for you to use PCMCIA card type PC cards with your CASSIOPEIA.
Important
• The PC Card Unit has a built-in lithium battery that provides power to the PC card. It
comes with an AC adapter that can be used to charge its built-in battery or to connect
to a wall outlet for power supply. See the user documentation that comes with the PC
Card Unit for details about the built-in battery and the AC adapter.

To connect your CASSIOPEIA to the PC Card Unit

1. Make sure your CASSIOPEIA is turned off.
• Press the [Power] button to turn off power.
2. If there is already a card in the slot, remove it.
3. Slide your CASSIOPEIA onto the PC Card Unit as shown in the illustration below.
• Make sure the CompactFlash card connector of the PC Card Unit slides into the
CASSIOPEIA card slot as far as it will go. This causes the CASSIOPEIA to lock in
place on the PC Card Unit.
29