Connecting The Cradle To A Computer; Using The Cassiopeia Usb Cable - Casio CASSIOPEIA Getting Started

Connecting the Cradle to a Computer

The cradle has a USB cable for connection to a computer. Connect the end of the cable
to a USB port of the computer to which you want to connect.
Important
• See "Required System Configuration" on page 24 for details on the type of computer
system required for use with the cradle.
• The above illustration is one example of possible connection configurations. The
locations and layouts of USB ports vary from computer to computer. See the
documentation that comes with your computer for full details on connecting cables to
it.
• Note that after connecting the cradle to your computer, you also need to make certain
PC Connect software settings on your computer to enable data transfers. See the
Quick Start Guide for information about how to install PC Connect, and PC Connect
online help for information about how to use it.

Using the CASSIOPEIA USB Cable

You can use the CASSIOPEIA USB cable to connect the CASSIOPEIA directly to a
computer.
Important
• See "Required System Configuration" on page 24 for the computer system that is
required for direct USB connection.
• The illustration below is just one possible connection configuration. The location and
layout of USB ports vary from computer to computer. See the documentation that
comes with your computer for full details on connecting cables to it.
• You must have PC Connect software installed on your computer in order to exchange
data with the CASSIOPEIA over a USB connection. See the Quick Start Guide for
information about how to install PC Connect, and PC Connect online help for
information about how to use it.
22
USB port