To Connect To A Computer Using The Cassiopeia Serial Cable; Required System Configuration - Casio CASSIOPEIA Getting Started

Pocket manager
Hide thumbs Also See for CASSIOPEIA:
Table of Contents

Advertisement

To connect to a computer using the CASSIOPEIA serial cable

Important
Before connecting your CASSIOPEIA to a computer, make sure you first install
the PC Connect software on your computer. Use the steps below to connect the
CASSIOPEIA to your computer when prompted to do so during the software
installation procedure.
1. Plug the serial cable into the serial port of your computer.
2. Turn off your CASSIOPEIA.
3. Connect the other end of the serial cable to your CASSIOPEIA.

Required System Configuration

The minimum system configuration required for running PC Connect software is
described below.
Minimum System Requirements for PC Connect
• Microsoft
Workstation 4.0 with Service Pack 6a, Microsoft Windows Millennium Edition
(Windows Me), Microsoft Windows 98, Microsoft Windows 95 OSR2. (U.S. version)
• Desktop computer with a Pentium
for Windows 2000)
• Desktop computer with a Pentium processor for Windows Me (150 MHz required for
Windows Me)
• Desktop computer with a 486/66 DX or higher processor (Pentium P90
recommended) for Windows 95/98
Serial port
®
®
Windows
2000 Professional Service Pack 2, Microsoft Windows NT
CASSIOPEIA Serial cable
®
processor for Windows NT (166 MHz required
24
®

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cassiopeia be-300Vtc-irb424m

Table of Contents