Speaker Setup - Onkyo TX-DS595 Instruction Manual

Speaker setup

Follow the steps below before you start operating the unit.
STANDBY/ON
STANDBY
POWER
ON OFF
PHONES AUDIO
SELECTOR
Speaker Configuration
These settings tell the TX-DS595 which speakers you have
connected and what size they are.
1. Press the SETUP button.
If anything other than "1. SPEAKER SETUP"
appears, turn the jog dial or press the
cursor buttons on the remote controller until "1.
SPEAKER SETUP" appears.
The display changes as follows: "1. SPEAKER SETUP" → "2.
INPUT SETUP" → "3. PREFERENCE."
* If the indicators directly above and below the jog dial are lit,
turning the jog dial selects a group of settings and pushing the jog
dial enters the selected group (i.e. takes you one level down).
2. Press the jog dial or ENTER button on
the remote controller.
3. Press the jog dial or ENTER button on
the remote controller.
4. Turn the jog dial or press the
cursor buttons on the remote
controller to set whether or not a
subwoofer is connected.
YES: Select when a subwoofer is connected.
NO: Select when a subwoofer is not connected.
* If the indicators directly to the left and right of the jog dial are lit,
turning the jog dial changes the setting of the currently selected
parameter and pushing the jog dial displays the next parameter.
5. Press either the jog dial or the
cursor button on the remote controller
once.
SETUP
A SPEAKERS B
CH LEVEL
MASTER VOLUME
SETUP
DSP / MODE ADJ
RETURN
PUSH TO ENTER
DISPLAY RT / PTY/ TP FM MODE PRESET MEMORY TUNING PRESET SMART SCAN NAVIGATOR
BASS
DVD VIDEO 1 VIDEO 2 VIDEO 3 TAPE FM AM PHONO C D
VCR
Jog dial and indicators
RETURN
Remote
TX-DS595
controller
SETUP
DSP / MODE ADJ
and
PUSH TO ENTER
DSP / MODE ADJ
PUSH TO ENTER
DSP / MODE ADJ
PUSH TO ENTER
DSP / MODE ADJ
or
PUSH TO ENTER
DSP / MODE ADJ
PUSH TO ENTER
RETURN
ENTER
TREBLE
595
AV RECEIVER TX-DS
Then turn the jog dial or press the
button on the remote controller to set the size of
your front speakers.
LARGE: Select if the front speakers are large sized.
SMALL: Select if the front speakers are small sized.
• If "NO" is selected for the Subwoofer setting, then this setting is
fixed to "LARGE".
6. Press either the jog dial or the
cursor button on the remote controller
once.
Then turn the jog dial or press the
buttons on the remote controller to set whether
or not a center speaker is connected and, if one
is connected, its size.
NONE: Select if no center speaker is connected.
LARGE: Select if the center speaker is large sized.
SMALL: Select if the center speaker is small sized.
• If "SMALL" is selected for the Front setting, then "LARGE"
cannot be selected for this setting.
7. Press either the jog dial or the
cursor button on the remote controller
once.
Then turn the jog dial or press the
button on the remote controller to set whether
or not surround speakers are connected and, if
they are connected, their size.
NONE: Select if no surround left and right speakers are connected.
LARGE: Select if the surround left and right speakers are large
sized.
SMALL: Select if the surround left and right speakers are small
sized.
• If "SMALL" is selected for the Front setting, then "LARGE"
cannot be selected for this setting.
Pressing the jog dial again or
subwoofer setting.
8. Press the RETURN button.
You return to the "SPEAKER CONFIG?"
display.
Notes :
• If you press the RETURN button again, you go back up one more
level.
• To exit the setup mode immediately, press the SETUP button.
SETUP
C H
VOL
DISC
AUDIO MUTING
ANGLE SUBTITLE
TV / VCR
LEVEL
RANDOM OPEN / CLOSE
REC
DVD C D
V 1 V 2 T 1 T 2
V 3 V 4
TUN P H
STEREO DIRECT DSP
1 2 3
SURR A.ST DSP
4 5 6
SP A SP B Re-EQ
7 8 9
DISPLAY DIMMER ZONE 2
+10 0 SEARCH
-- / --- ENTER
HOME THEATER CONTROLLER
RC-447M
DSP / MODE ADJ
or cursor
PUSH TO ENTER
DSP / MODE ADJ
PUSH TO ENTER
DSP / MODE ADJ
or cursor
PUSH TO ENTER
DSP / MODE ADJ
PUSH TO ENTER
or cursor DSP / MODE ADJ
PUSH TO ENTER
cursor button returns you to the
RETURN
19