Remote Controller - Onkyo TX-DS595 Instruction Manual

Remote controller

1
2
3
4
5
6
7
C H
DISC
8
9
AUDIO
ANGLE
0
TV / VCR
A
RANDOM
REC
DVD
B
V 1
V 3
STEREO
1
C
SURR
4
SP A
7
DISPLAY
+ 10
-- / ---
HOME THEATER CONTROLLER
8
D
E
F
VOL
G
H
I
MUTING
SUBTITLE
LEVEL
OPEN / CLOSE
C D
V 2 T 1 T 2
V 4
TUN P H
DIRECT DSP
2 3
A.ST
DSP
5 6
SP B Re-EQ
8 9
J
DIMMER ZONE 2
0
SEARCH
ENTER
RC - 447M
SEND/LEARN indicator
This indicator acts as a guide when commands are programmed into
or sent by the remote controller. It also warns the user when an error
is made or battery power is low.
ON/STDBY button [16]
ON: Turns on the TX-DS595.
STDBY: Places the TX-DS595 in the standby state.
Be aware that pressing the STDBY button only places the TX-
DS595 in standby and does not turn the power completely off.
SLEEP button [26]
Sets the sleep function.
The SLEEP button enables you to set the TX-DS595 to turn off
automatically after a specified time period.
DIRECT MACRO button [46]
For executing and programming the Direct Macro function.
MODE buttons and indicators [40-47]
For selecting the component to be operated by the remote controller.
When a MODE button is pressed, it will light green for 8 seconds.
The selected MODE button will also light whenever any other
operation button is pressed to tell you which mode the remote
controller is in.
RETURN button [19, 20, 30-32]
Press to move up one level in the setup mode.
CH/DISC button [35, 36]
When in the RCVR mode, for selecting a tuner preset channel.
For selecting the disc to be played back for components with disc
changers when in the DVD or CD modes.
CH SEL/TOP MENU button [36]
CH SEL: For selecting the speaker for level adjustment when in the
RCVR mode. Used together with the LEVEL / buttons.
TOP MENU: When in the DVD mode, for displaying the menu
screen(s) recorded on DVD media.
AUDIO/TV/VCR button [27, 41]
AUDIO: For selecting the audio input signal. The setting changes
from "AUTO" to "MULTICH" to "ANALOG" and back each time
this button is pressed.
TV/VCR: Must be preprogrammed for use in the TV and VCR
modes.
LEVEL /ANGLE and LEVEL
LEVEL / : Select the speaker whose volume is to be adjusted
using the CH SEL button and adjust the volume using the LEVEL /
buttons in the RCVR mode. [9, 27]
ANGLE: When in the DVD mode, for selecting a camera angle
when a DVD-Video is recorded with multiple angle playback. [36]
SUBTITLE: When in the DVD mode, for selecting one of the
subtitle languages recorded on a DVD-Video. [36]
CD/TAPE/DVD/MD operation buttons [34-37]
For operating Onkyo components connected to the TX-DS595.
INPUT SELECTOR buttons [25]
/SUBTITLE buttons