Replacing The Filters - National Flooring Equipment DL3000 Service Manual

3.4

Replacing the filters

To replace the filters, proceed as follows:
Turn off the dust collector by pressing the motor STOP buttons.

Disconnect the dust collector plug from the power socket.

Important!
Wear individual protection devices.
Block the dust collector by means of the retainer.

Lift the lever that locks the Longopac® container. Remove the Longopac® container.

Release the retainers that hold the motor head. Lift the motor head and rest this on a flat surface being

careful not to damage the power cable.
- 13 -
Maintenance Section