Table of Contents
Advertisement
Safety
SAFETY PRECAUTIONS (CONTINUED)
•
Start up and switch off operations and control devices have to be handled in accordance with the operating instructions.
•
Before starting the machine make sure that nobody can be endangered when the machines starts running.
MECHANICAL SERVICE WORK
Before starting any servicing work on the machine, turn off the machine and unplug any cords from their power source.
Adjustments, servicing and inspection work and inspection intervals specified in these Machine Operation instructions as well as any informa-
tion on the replacement on parts and systems of the machine must be undertaken and / or complied with.
These activities can only be undertaken by qualified personnel.
Before starting any maintenance or repair work the operator of the machine must be informed about it.
During all work related to the use, the re-erection or the adjustment of the machine and of the safety devices as well as inspection, maintenance
and repair, the start up and shut off procedures must be done in accordance with the instruction manual.
The dust bag of a connected dust collector must be emptied before transportation. Please handle in accordance with regulations.
Do not use any aggressive cleaning materials! Use lint-free cleaning cloths. Always tighten any screw connection that are undone during servic-
ing and maintenance work.
If safety devices need to be dismantled during setting up, servicing and repair work, these safety devices must be reinstalled and inspected
immediately after completion of the servicing and repair work.
WARNING: WORK ON THE ELECTRICAL PARTS OF THE EQUIPMENT MAY ONLY BE UNDERTAKEN BY A SKILLED ELECTRICIAN OR BY
A TRAINED PERSON UNDER THE GUIDANCE AND SUPERVISION OF A SKILLED ELECTRICIAN AS WELL AS IN ACCORDANCE WITH THE
ELECTRICAL ENGINEERING REGULATIONS.
Make sure that process materials and replacement parts are disposed of safely and in an environmentally-friendly manner.
Make sure that electrical components used for replacement purpose comply with the original parts and are correctely adjusted if necessary.
ELECTRICAL ENGINEERING REGULATIONS
Only start work once you are familar with the electrical engineering regulations that apply to your area.
Only use voltage meters that comply with the regulations when troubleshooting.
From time to time check voltage meters to ensure that they are operationally efficient.
Use only proper tools for your work. Damaged tools have to be repaired immediately or be replaced.
For your own safety the required safety equipment and clothing used when working with the machine
(e.g. safety glasses, safety shoes, safety gloves).
Please instruct your operators and the repair personnel about the following points:
•
Greasing, cleaning, and repair work is only allowed if the machine is shut off and power cords unplugged.
•
Make sure that during the work on the machine it cannot be started.
•
Do not open or remove safety covers while the machine is running.
•
Do not forget to reinstall all safety covers and safety devices after cleaning, repair and maintenance work.
•
Do not touch moving parts and do not walk into the working path of the machine.
•
Please be sure that no person is in the working area and could be endangered before starting the machine.
Fax: 763-535-8255
10
info@nationalequipment.com
Advertisement
Table of Contents
