CPI 1194 Series Assembly Manual page 17

CPI Satcom & Antenna Technologies
Feed Rod
See Detail
Feed Support
Tube
See Detail D
STEP 3:
A). Connect the feed rods to the feed
support tube with ( items: 4, 6, 7 )
and with [ 2 ] of ( item 5 ).
C
Feed Support Tube
STEP 4:
A). Attach feed support tube to the
reflector with ( items: 3, 6, 7 )
and with [ 2 ] of ( item 5 ).
B). Tighten the hardware at the reflector
rim snugly ( Detail A ).
C). Tighten the hardware connecting
the feed rods to the feed support
tube ( Detail C ).
D). Tighten the hardware that connects
the feed support tube to the feed
support brackets ( Detail B ).
E). Tighten the hardware connecting
the feed support tube to the reflector
( Detail D ).
F). Refer to separate instructions for
specific feed/ODE assembly to feed
support.
17
4096-394
1.8M SERIES 1194
the