Table of Contents
Advertisement
CPI Satcom & Antenna Technologies
4.0
MAINTENANCE OVERVIEW
After installation, the antenna requires only periodic inspection. It is anticipated
that maintenance, if required, will be minimal and easily handled by a local or in-
house maintenance staff. The materials used in the construction of this Earth
Station Antenna virtually eliminate any maintenance repairs.
4.1
PERIODIC INSPECTION
It is suggested that a periodic inspection be performed at least every six months.
NOTE: After any very severe weather conditions, inspection of the antenna
should be performed to determine if foreign objects have caused damage or
if survival specifications have been exceeded.
This inspection should include the following:
1)
Check all bolting locations - all bolts should be tight.
2)
Check all structural members - repair or replace if damaged.
3)
Check the foundation anchor bolts - they must be secure and with no failure
signs in foundation.
4)
Check for corrosion - on the reflector structure and mount.
4.2
REFLECTOR
CPI's reflector does not require any maintenance. The composite construction of
the reflector is virtually impervious to any damages that could be caused by
weather or other atmospheric conditions.
It is only necessary to inspect for any physical damage done by vandalism or very
severe weather conditions.
Should any damage be detected to a portion of the reflector, contact the Customer
Service Department at CPI for recommendations involving reflector repair.
SECTION IV
MAINTENANCE
21
4096-394
1.8M SERIES 1194
Advertisement
Table of Contents
