CPI 1194 Series Assembly Manual page 16

CPI Satcom & Antenna Technologies
CAUTION: During the assembly procedure, the sequence of instructions must
be followed. Do Not Tighten Any Hardware Until Instructed.
Refer to the feed support parts list and the steps shown below.
See Detail A
Feed Rods
Feed Support Tube
See Detail B
STEP 1:
A). Attach feed rods to reflector with
( items: 3, 6, 7 ) and with [ 2 ] of
( item 5 ).
NOTE: The 2.00" flat end of the feed
mounts to the outside rim of
the reflector
STEP 2:
A). Mount feed support tube between the
feed support brackets with [ 2 ] of
( items: 8, 5, 6, 7 ).
16
4096-394
1.8M SERIES 1194