PREPARATION
ATTACHING THE CARRY STRAP
1
2
4
3
Attention
• Once you have attached the carry strap, please make sure that the
clips are mounted correctly to prevent the camera from falling.
34
PREPARATION ▸ ATTACHING THE CARRY STRAP
PREPARING THE CHARGER
Use the mains cable with the matching regional plug to connect the
charger to mains electricity.
Note
• The charger will automatically adapt to local mains voltage.
CHARGING THE BATTERY
The camera is powered by a lithium-ion battery.
INSERTING THE BATTERY IN THE CHARGER
▸
Slide the battery into the charger with the groove facing up until
the contacts meet
▸
Press down on the battery until you can hear and feel it clicking
into place
▸
Ensure that the battery is fully inserted into the charger
REMOVING THE BATTERY FROM THE CHARGER
▸
Tilt the battery up and lift it out at an angle
CHARGE STATUS INDICATORS ON THE CHARGER
The status LED indicates a correct charging process.
Display
Charge status
Charge time*
flashes green battery is charging
CHARGE
80%
approx. 2 h
lights up orange
80%
100%
approx. 3½ h
continuous
CHARGE
green light
Disconnect the charger from mains electricity when the charging
process is complete. There is no risk of overcharging.
* for a completely discharged battery
PREPARATION ▸ CHARGING THE BATTERY
35