Brightness; Lcd Panel; Evf; Color Rendering - Leica SL2-S Instruction Manual

BRIGHTNESS

You can adjust brightness for best visibility in various lighting condi-
tions. Brightness is set individually for the LCD panel and the view-
finder. Selection occurs via key control or touch control.

LCD PANEL

▸ Select in the main menu
Display Settings Display Settings
▸ Select
LCD Brightness LCD Brightness
▸ Select the desired brightness or
Auto Auto
▸ Confirm selection

EVF

▸ Select in the main menu
Display Settings Display Settings
▸ Select
EVF Brightness EVF Brightness
▸ Look through the viewfinder
▸ Select the desired brightness
▸ Confirm selection
Note
• The setting is not available here.
Auto Auto
82 CAMERA BASIC SETTINGS ▸ LCD PANEL/VIEWFINDER SETTINGS

COLOR RENDERING

Color rendering can also be adjusted. Brightness is set individually for
the LCD panel and the viewfinder. Selection occurs via key control or
touch control.
LCD PANEL
▸ Select in the main menu
Display Settings Display Settings
▸ Select
LCD Color Adjustment LCD Color Adjustment
▸ Select the desired color setting
▸ Confirm selection
EVF
▸ Select in the main menu
Display Settings Display Settings
▸ Select
EVF Color Adjustment EVF Color Adjustment
▸ Look through the viewfinder
▸ Select the desired color setting
▸ Confirm selection

AUTOMATIC LCD PANEL AND EVF SHUTDOWN

The LCD panel and EVF deactivate automatically to save power.
Factory setting:
1 min 1 min
▸ Select in the main menu
Camera Settings Camera Settings
▸ Select
Power Saving Power Saving
▸ Select
All Displays Auto Off All Displays Auto Off
▸ Select the desired setting
( , , )
30 s 30 s 1 min 1 min 5 min 5 min
Note
• The top display is not affected by the automatic shutdown.

EVF FRAME RATE

The image frequency of the EVF can be set.
Factory setting:
60 fps 60 fps
▸ Select in the main menu
Display Settings Display Settings
▸ Select
EVF Frame Rate EVF Frame Rate
▸ Select the desired setting
( , )
60 fps 60 fps 120 fps 120 fps

ACOUSTIC SIGNALS

Some functions can be acknowledged with acoustic signals. The
following special functions can be configured separately:
– Electronic shutter sound
– AF confirmation

VOLUME

The volume of active signals can be set.
Factory setting:
Low Low
▸ Select in the main menu
Camera Settings Camera Settings
▸ Select
Acoustic Signal Acoustic Signal
▸ Select
Volume Volume
▸ Select /
Low Low High High
ACOUSTIC SIGNALS
This setting specifies, whether the camera shout output general
notification signals, e.g. during the delay time of the self-timer or as
a warning signal, when the memory card is full.
Factory setting:
Off Off
▸ Select in the main menu
Camera Settings Camera Settings
▸ Select
Acoustic Signal Acoustic Signal
▸ Select
Acoustic Signals Acoustic Signals
▸ Select
On On
CAMERA BASIC SETTINGS ▸ ACOUSTIC SIGNALS 83