Preparation; Attaching The Carry Strap; Preparing The Charger; For Use Outside The Us - Leica S3 Instruction Manual

PREPARATION

EN

ATTACHING THE CARRY STRAP

1
3
Attention
Once you have attached the carry strap, please make sure that the clips
are mounted correctly to prevent the camera from falling.
18

PREPARING THE CHARGER

FOR USE OUTSIDE THE US

▸ Attach the plug suitable for local mains outlets to the charger.
2
▸ Pull the release button upward
▸ Slide the plug attachment downward from its stop position
▸ Then fully remove the plug
▸ Slide the required plug version into the charger until it clicks into place
4

FOR USE IN THE US

▸ Remove the default mains plug installed from the charger
▸ Pull the release button upward
▸ Slide the plug attachment downward from its stop position
▸ Unfold the two pins of the US plug connector from their rest position
Notes
• The charger will automatically adapt to local mains voltage.
• The supplied car charging cable can be used in all vehicles with 12 V or
24 V on-board power supply. The charger will automatically adapt to
the relevant in-car voltage.