Access As Needed; Automatic Sequence; Other Settings; Speed - Leica SL2-S Instruction Manual

ACCESS AS NEEDED

The configured focus positions can be accessed any number of
times.
With delay time:
– The active delay time is displayed in red and counts down.
– After that, the transition to the next desired focus position begins.
Without delay time:
– The transition to the next desired focus position is immediate.
▸ Tap the desired focus position
• The camera focuses with the set speed on the configured dis-
tance (once the delay time has elapsed - if set).
Note
• The transition to a focus position can be canceled via the "STOP"
button, as long as it is not yet completed.
220 RECORDING VIDEO ▸ FOCUSING

AUTOMATIC SEQUENCE

An automatic sequence of focus positions can be initiated if at least
two positions have been configured.
START
▸ Configure at least two focus positions
▸ Tap the "START" button
• The "START" button becomes "STOP" for the duration of the
sequence.
• All configured focus positions will be accessed in sequence
(once the set delay time has elapsed - if any).
All other buttons are deactivated while the focus sequence runs.
Note
• The automatic focus sequence can be run any number of times.
The focus sequence will automatically revert to the first position
when it is restarted.
CANCEL
▸ Tap the "STOP" button
• The running focus sequence is canceled.
Initiating the automatic focus sequence directly at the
beginning of the recording
The automatic focus sequence can be initiated directly at the begin-
ning of the recording.
▸ Select in the main menu
Focusing Focusing
▸ Select
Focus Mode Focus Mode
▸ Select
Follow Focus Follow Focus
▸ Select
Start FF with Recording Start FF with Recording
▸ Select /
On On Off Off
Exiting the function
▸ Canceling a running sequence
▸ Tap the "EXIT" button
• The "EXIT" button is unavailable while a focus sequence is
running.

OTHER SETTINGS

SPEED

The speed at which one focus position transitions to the next can be
configured. This setting will then apply for all transitions.
▸ Select in the main menu
Focusing Focusing
▸ Select
Focus Mode Focus Mode
▸ Select
Follow Focus Follow Focus
▸ Select
Speed Speed
▸ Select the desired setting
( , , , , )
Very Low Very Low Low Low Medium Medium High High Very High Very High

SUBSEQUENT FOCUS MODE

After exiting, you can switch automatically to a pre-configured focus
mode (e.g. ) or to the most recently used focus mode.
MF MF
▸ Select in the main menu
Focusing Focusing
▸ Select
Focus Mode Focus Mode
▸ Select
Follow Focus Follow Focus
▸ Select
Return to Return to
▸ Select the desired setting
( , , , , )
Intelligent AF Intelligent AF AFs AFs AFc AFc MF MF Previous setting Previous setting
RECORDING VIDEO ▸ FOCUSING 221