Preparation Before Surgery; Choosing Scene Data - Leica HD C100 User Manual

Preparation before surgery

The Scene data are assigned at the factory as follows:
Scene Files Department
1 Neurosurgery
2 FL400
3 Cataract
4 Vitrectomy
5 FL560
Select scene file
Select Scene Files 1 to Scene Files 5 with the
X X
control unit or the cursor buttons
pressing the button.
When you select the memory location ("Scene Files"), the stored
scene data is active.
7.3.6 "Info" menu
The following information is shown by pressing the
the remote control (example):
MODEL :
SERIAL NO.:
HW VERSION :
SW VERSION :
SCENE FILE :
VIDEO FORMAT :
SHUTTER TIME :
SENSOR GAIN :
DATE & TIME :
CAMERA HEAD :
7.3.7 "Eject USB" menu
The function is to remove USB storage device safely form the
control unit.
• Select EJECT USB before removing the USB storage
device.
• Remove the USB storage device after the message " USB
EJECTED SUCCESSFULLY" appears.
14
button on the
t / X and confirmed by
button on
HDC100
DDMMYYXXX
V1.0
V1.0
1
1080p59.94
Jan-60
14 dB
01/01/2018 0:02
CONNECTED
Leica HD C100 / Ref. 10 733 205 / Version 01
8 Preparation before surgery
8.1

Choosing scene data

Leica HD C100 can save 5 configurations for certain tasks or
environments as scene data.
The currently selected scene data is shown by the LEDs by means of
the "Scene data" button and on the monitor (if enabled).
1
Press the "Scene data" button (1) until the LED for the desired
X X
scene data lights up on the control unit.
With the factory settings, the selected scene data appear on the
monitor.
Leica HD C100 immediately works with the stored settings.
Scene data can only be selected on the control unit.
The scene data are assigned at the factory as follows:
Scene Files Department
1 Neurosurgery
2 FL400
3 Cataract
4 Vitrectomy
5 FL560
If working without scene data
Configure the menu settings for the current environment and
X X
task.