ADJ VIZI BSW 300 User Instructions page 23

S Y S T E M M E N U
FIXTURE INFORMATION -
Fixture Use Time - With this function, you can check the fixture running time.
1. Access the main menu, and press the UP or DOWN buttons so that "Fixture Information" is
highlighted, then press ENTER.
2. Press the UP or DOWN buttons until "Fixture Use Time" is displayed, and press ENTER. The
fixture running time will now be displayed.
3. Press the MENU button to return to the main menu.
Firmware Version - With this function, you can check the current firmware version.
1. Access the main menu, and press the UP or DOWN buttons so that "Fixture Information" is
highlighted, then press ENTER.
2. Press the UP or DOWN buttons until "Firmware Version" is displayed, and press ENTER. The
current firmware version will now be displayed.
3. Press the MENU button to return to the main menu.
RESET FUNCTION
Pan & Tilt - With this function, you can reset the pan & tilt motors.
1. Access the main menu, and press the UP or DOWN buttons so that "Reset Function" is highlighted,
then press ENTER.
2. Press the UP or DOWN buttons until "Pan & Tilt" is displayed, and press ENTER.
3. Use the UP or DOWN buttons to switch between "No" or "Yes". To reset the pan & tilt motors, select
"Yes" and press ENTER.
Effect - With this function, you can reset the effect motors.
1. Access the main menu, and press the UP or DOWN buttons so that "Reset Function" is highlighted,
then press ENTER.
2. Press the UP or DOWN buttons until "Effect" is displayed, and press ENTER.
3. Use the UP or DOWN buttons to switch between "No" or "Yes". To reset the effects motors, select "Yes"
and press ENTER.
All - With this function, you can reset all of the motors.
1. Access the main menu, and press the UP or DOWN buttons so that "Reset Function" is highlighted,
then press ENTER.
2. Press the UP or DOWN buttons until "All" is displayed, and press ENTER.
3. Use the UP or DOWN buttons to switch between "No" or "Yes". To reset all of the motors, select "Yes"
and press ENTER.
SPECIAL FUNCTIONS
Special Functions - Within this menu, you can reset the fixture to the original factory settings.
1. Access the main menu, and press the UP or DOWN buttons so that "Special Functions" is highlighted,
then press ENTER.
2. "Factory Setting" will now be displayed, and press ENTER.
3. To reset the fixture to factory settings, use the UP or DOWN buttons to "Yes" and press ENTER. If you
do not wish to reset to factory settings, highlight "No" and press ENTER.
-
-
23