ADJ VIZI BSW 300 User Instructions page 21

S Y S T E M M E N U
Sound Mode - In this menu you can activate sound active mode.
1. Access the main menu, and press the UP or DOWN buttons so that "Show Setting" is highlighted,
then press ENTER.
2. Press the UP or DOWN buttons until "Sound Mode" is displayed, and press ENTER. The current
setting will now be displayed.
3. Use the UP or DOWN buttons to switch between "OFF" or "ON". To activate sound active mode
select "ON", to deactivate select "OFF".
4. Press ENTER to confirm your selection or press the MENU button to return to the main menu.
Sound Sense - In this menu you can adjust the sound sensitivity.
1. Access the main menu, and press the UP or DOWN buttons so that "Show Setting" is highlighted,
then press ENTER.
2. Press the UP or DOWN buttons until "Sound Sense" is displayed, and press ENTER. The current
setting will now be displayed.
3. Use the UP or DOWN buttons to adjust the sensitivity between 0-100. "0" being the least sensitive,
and 100 being the most sensitive.
4. Press ENTER to confirm your selection or press the MENU button to return to the main menu.
FIXTURE SETTINGS
Pan Invert - With this function, you can reverse the Pan movement.
1. Access the main menu, and press the UP or DOWN buttons so that "Fixture Setting" is highlighted,
then press ENTER.
2. Press the UP or DOWN buttons until "Pan Invert" is displayed, and press ENTER. The current
setting will now be displayed.
3. Use the UP or DOWN buttons to switch between "YES" and "NO". Selecting "YES" will activate pan
inverse, "NO" will deactivate the function.
4. Press ENTER to confirm your selection or press the MENU button to return to the main menu.
Tilt Invert - With this function, you can reverse the Tilt movement.
1. Access the main menu, and press the UP or DOWN buttons so that "Fixture Setting" is highlighted,
then press ENTER.
2. Press the UP or DOWN buttons until "Tilt Invert" is displayed, and press ENTER. The current
setting will now be displayed.
3. Use the UP or DOWN buttons to switch between "YES" and "NO". Selecting "YES" will activate tilt
inverse, "NO" will deactivate the function.
4. Press ENTER to confirm your selection or press the MENU button to return to the main menu.
P/T Feedback - With this function, you have the pan and tilts position feedback while out of step or not
feedback while out of step.
1. Access the main menu, and press the UP or DOWN buttons so that "Fixture Setting" is highlighted,
then press ENTER.
2. Press the UP or DOWN buttons until "P/T Feedback" is displayed, and press ENTER. The current
setting will now be displayed.
3. Use the UP or DOWN buttons to switch between "YES" and "NO". Selecting "YES" will activate
feedback, "NO" will deactivate the function.
4. Press ENTER to confirm your selection or press the MENU button to return to the main menu.
Dimmer Mode - With this function, you can select your desired dimmer curve.
1. Access the main menu, and press the UP or DOWN buttons so that "Fixture Setting" is highlighted,
then press ENTER.
2. Press the UP or DOWN buttons until "Dimmer Mode" is displayed, and press ENTER. The current
curve setting will now be displayed.
3. Use the UP or DOWN buttons to scroll through the different dimmer curves.
4. Press ENTER to confirm your selection or press the MENU button to return to the main menu.
-
21