ADJ VIZI BSW 300 User Instructions page 22

S Y S T E M M E N U
DISPLAY SETTINGS
Display Invert - With this function, you can "flip" the display 180 degrees.
1. Access the main menu, and press the UP or DOWN buttons so that "Display Setting" is highlighted,
then press ENTER.
2. Press the UP or DOWN buttons until "Display Invert" is displayed, and press ENTER. The current
setting will now be displayed.
3. Use the UP or DOWN buttons to switch between "No" or "Yes". Selecting "Yes" will "flip" the display,
"No" will return the display to normal.
4. Press ENTER to confirm your selection or press the MENU button to return to the main menu.
Backlight Intensity - With this function, you can adjust the intensity of the display backlight.
1. Access the main menu, and press the UP or DOWN buttons so that "Display Setting" is highlighted,
then press ENTER.
2. Press the UP or DOWN buttons until "Backlight Intensity" is displayed, and press ENTER. The
current setting will now be displayed.
3. Use the UP or DOWN buttons to to adjust the intensity between 1-10. 1 is the lowest intensity, 10
the brightest.
4. Press ENTER to confirm your selection or press the MENU button to return to the main menu.
Contrast Ratio - With this function, you can adjust the contrast ratio of the display.
1. Access the main menu, and press the UP or DOWN buttons so that "Display Setting" is highlighted,
then press ENTER.
2. Press the UP or DOWN buttons until "Contrast Ratio" is displayed, and press ENTER. The current
setting will now be displayed.
3. Use the UP or DOWN buttons to to adjust the intensity between 0-30. 0 is the lowest intensity, 30
the brightest.
4. Press ENTER to confirm your selection or press the MENU button to return to the main menu.
Temperature Unit - With this function, you can switch the temperature setting between Celsius or
Fahrenheit.
1. Access the main menu, and press the UP or DOWN buttons so that "Display Setting" is highlighted,
then press ENTER.
2. Press the UP or DOWN buttons until "Temperature Unit" is displayed, and press ENTER. The
current setting will now be displayed.
3. Use the UP or DOWN buttons to switch between °C or °F.
4. Press ENTER to confirm your selection or press the MENU button to return to the main menu.
Display Warning - With this function, you can make the unit display any service warnings or errors.
1. Access the main menu, and press the UP or DOWN buttons so that "Display Setting" is highlighted,
then press ENTER.
2. Press the UP or DOWN buttons until "Display Warning" is displayed, and press ENTER. The
current setting will now be displayed.
3. Use the UP or DOWN buttons to switch between "NO" (normal display) or "YES" (show service
warnings in display).
4. Press ENTER to confirm your selection or press the MENU button to return to the main menu.
FIXTURE TEST -
Auto Test - With this function, you can run an Auto Test.
1. Access the main menu, and press the UP or DOWN buttons so that "Fixture Test" is highlighted,
then press ENTER.
2. Use the UP or DOWN buttons to highlight "Auto Test".
3. Press ENTER to confirm your selection or press the MENU button to return to the main menu.
Manual Test - With this function you can run a Manual Test.
1. Access the main menu, and press the UP or DOWN buttons so that "Fixture Test" is highlighted,
then press ENTER.
2. Use the UP or DOWN buttons to highlight "Manual Test". Press ENTER to select and use the UP
or DOWN buttons to change the channel value.
3. Press the MENU button to return to the main menu.
-
22