Table of Contents
Advertisement
Satellite dish
The satellite dish must have a clear view to the satellites.
Mount the satellite dish according to the fitting instructions.
In case you already have a satellite dish mounted, note that you
need a Universal LNB which works on the frequencies 10.70-
12.75 GHz to be able to handle digital signals.
Connecting a TV and a VCR
Satellite dish
SCART
See pages 13 and 14 if you want to connect to an analogue
satellite receiver or connect in any other way.
Switching on for the first time
• Plug in your Mediamaster.
• The "First time installation" menu is shown.
• Press the select button on the remote control to start the in-
stallation procedure.
Language
• Select the desired menu language with cursor up/cursor
down.
This will also become the main language for audio and sub-
titling.
• Press select to continue.
Antenna/satellite selection
This Quick guide describes connection to the most common
satellite dish installations with one Universal LNB.
• Select alternative "One antenna/one LNB configuration".
• Press select to continue.
If you have two or more LNBs connected to your satellite
dish, see page 16.
Quick guide
Antenna
RF
TV
Video
SCART
Preparing the
Remote Control
2
1
3
GB 3
Advertisement
Table of Contents
