Colour And Lighting Settings - Nokia N79 User Manual

Add to album — Save the image to an album in
●
Photos.
Record location — To add GPS location coordinates
●
to each image file, select Yes. Receiving a GPS signal
may take time or the signal may not be available.
See "Location information", p. 79.
Show captured image
●
the captured image after it is taken or to continue
image capturing immediately.
Default image name
●
for the captured images.
Extended digital zoom
●
available in the main camera.
allows the zoom increments to be smooth and
continuous between digital and extended digital
zoom, On (paused) allows the zoom increments to
pause at the digital and extended digital step point,
and Off allows a limited amount of zoom while
retaining the image resolution. Use the extended
zoom only when getting closer to the subject is
more important than the final image quality. The
overall quality of a digitally zoomed image is always
lower than that of an unzoomed image.
Capture tone — Set the tone that sounds when you
●
capture an image.
Memory in use — Select where to store your
●
images.
Rotate image — Select whether you want images
●
that are captured when the device is held upright to
be rotated when you open them in Gallery.
— Select whether to view
— Define the default name
— The setting is only
On (continuous)
Restore camera settings
●
settings to default values.

Colour and lighting settings

In the active toolbar, select from the following:
Flash mode ( ) (image only) — Select the desired
●
flash mode.
Colour tone ( ) — Select a colour effect.
●
Switch video light on
●
— Switch the video light on or off (video mode
only).
White balance ( ) — Select the current lighting
●
condition. This allows the camera to reproduce
colours more accurately.
Exposure compensation
●
are shooting a dark subject against a very light
background, such as snow, adjust the exposure to
+1 or +2 to compensate for the background
brightness. For light subjects against a dark
background, use -1 or -2.
Sharpness ( ) (image only) — Adjust the
●
sharpness of the image.
Contrast ( ) (image only) — Adjust the difference
●
between the lightest and darkest parts of the image.
Light sensitivity ( ) (image only) — Increase the
●
light sensitivity in low light conditions to avoid too
dark images.
— Restore the camera
or Switch video light off
( ) (image only) — If you
85