Wireless Lan Settings; Sip Settings; Configurations; Access Point Name Control - Nokia N79 User Manual

The packet data settings affect all access points using
a packet data connection.
Packet data connection
●
available and you are in a network that supports
packet data, the device registers to the packet data
network. Starting an active packet data connection
(for example, to send and receive e-mail) is quicker.
If there is no packet data coverage, the device
periodically tries to establish a packet data
connection. If you select
uses a packet data connection only if you start an
application or action that needs it.
Access point — The access point name is needed
●
to use your device as a packet data modem to a
compatible computer.
High speed packet access
●
use of HSDPA (network service) in UMTS networks.

Wireless LAN settings

Press , and select Tools
Connection Wireless
>
Show WLAN availability
●
displayed in the standby mode when a wireless LAN
is available.
Scan for networks — If you set
●
availability to Yes, select how often the device
searches for available wireless LANs and updates the
indicator.
— If you select When
When needed, the device
— Enable or disable the
Settings
> >
LAN.
— Select whether
Show WLAN
To view advanced settings, select
Advanced settings. Changing wireless LAN advanced
settings is not recommended.

SIP settings

Press , and select
Connection SIP
>
Session Initiation Protocol (SIP) settings are needed for
certain network services using SIP. You may receive the
settings in a special text message from your service
provider. You can view, delete, or create these setting
profiles in SIP settings.

Configurations

Press , and select
Connection > Configurations.
You may receive trusted server settings from your
service provider in a configuration message. You can
save view or delete these settings in configurations.

Access point name control

is
Press , and select
Connection APN
>
With the access point name control service, you can
restrict packet data connections and allow your device
to use only certain packet data access points.
Options
>
Tools Settings
> >
settings.
Tools Settings
> >
Tools Settings
> >
control.
165