Colour And Lighting Settings - Nokia N85 User Manual

Record location — To add GPS location
●
coordinates to each image file, select On.
Receiving a GPS signal may take time or the signal
may not be available.
Show captured image
●
view the captured image after it is taken or to
continue image capturing immediately.
Default image name
●
name for the captured images.
Extended digital zoom
●
available in the main
allows the zoom increments to be smooth and
continuous between digital and extended digital
zoom, On (paused) allows the zoom increments
to pause at the digital and extended digital step
point, and Off allows a limited amount of zoom
while retaining the image resolution. Use the
extended zoom only when getting closer to the
subject is more important than the final image
quality. The overall quality of a digitally zoomed
image is always lower than that of an unzoomed
image.
Capture tone — Set the tone that sounds when
●
you capture an image.
Memory in use — Select where to store your
●
images.
Restore camera settings
●
settings to default values.
— Select whether to
— Define the default
— The setting is only
camera.On (continuous)
— Restore the camera

Colour and lighting settings

In the active toolbar, select from the following:
Flash mode ( ) (image only) — Select the
●
desired flash mode.
Colour tone ( ) — Select a colour effect.
●
Switch video light on
●
— Switch the video light on or off (video mode
only).
White balance ( ) — Select the current
●
lighting condition. This allows the camera to
reproduce colours more accurately.
Exposure compensation
●
you are shooting a dark subject against a very
light background, such as snow, adjust the
exposure to +1 or +2 to compensate for the
background brightness. For light subjects
against a dark background, use -1 or -2.
Sharpness ( ) (image only) — Adjust the
●
sharpness of the image.
Contrast ( ) (image only) — Adjust the
●
difference between the lightest and darkest
parts of the image.
Light sensitivity ( ) (image only) — Increase
●
the light sensitivity in low light conditions to
avoid too dark images.
The screen display changes to match the settings
you make.
or Switch video light off
( ) (image only) — If
45