Colour And Lighting Settings - Nokia N96 User Manual

Add to album
●
Photos.
Record location
●
to each image file, select On. Receiving a GPS signal
may take time or the signal may not be available.
See "Location information", p. 64.
Show captured image
●
the captured image after it is taken or to continue
image capturing immediately.
Default image name
●
for the captured images.
Extended digital zoom
●
available in the main
allows the zoom increments to be smooth and
continuous between digital and extended digital
zoom, On (paused)
pause at the digital and extended digital step point,
and Off allows a limited amount of zoom while
retaining the image resolution. Use the extended
zoom only when getting closer to the subject is
more important than the final image quality. The
overall quality of a digitally zoomed image is always
lower than that of an unzoomed image.
Capture tone — Set the tone that sounds when you
●
capture an image.
Memory in use
●
images.
Rotate image
●
that are captured when the device is held upright to
70
be rotated when you open them in Gallery.
— Save the image to an album in
— To add GPS location coordinates
— Select whether to view
— Define the default name
— The setting is only
camera.On (continuous)
allows the zoom increments to
— Select where to store your
— Select whether you want images
Restore camera settings
●
settings to default values.

Colour and lighting settings

In the active toolbar, select from the following:
Flash mode ( ) (image only) — Select the desired
●
flash mode.
Colour tone ( ) — Select a colour effect.
●
Video light — Switch the video light on or off
●
(video mode only).
White balance ( ) — Select the current lighting
●
condition. This allows the camera to reproduce
colours more accurately.
Exposure compensation
●
are shooting a dark subject against a very light
background, such as snow, adjust the exposure to
+1 or +2 to compensate for the background
brightness. For light subjects against a dark
background, use -1 or -2.
Sharpness ( ) (image only) — Adjust the
●
sharpness of the image.
Contrast ( ) (image only) — Adjust the difference
●
between the lightest and darkest parts of the image.
Light sensitivity ( ) (image only) — Increase the
●
light sensitivity in low light conditions to avoid too
dark images.
The screen display changes to match the settings you
make.
— Restore the camera
( ) (image only) — If you