Voice And Video Mailboxes; Answer Or Decline A Call; Make A Conference Call - Nokia N79 User Manual

Tip: When you have only one active voice call, to
put the call on hold, press the call key. To activate
the call, press the call key again.
During an active call, to route the sound from the
handset to the loudspeaker, select
Activate loudspeaker. If you have attached a
compatible headset with Bluetooth connectivity, to
route the sound to the headset, select
Activate handsfree. To switch back to the handset,
select Options
>
To end an active call and replace it by answering the
waiting call, select
If you have several calls active, to end them all, select
Options End all
>
Many of the options that you can use during a voice call
are network services.

Voice and video mailboxes

To call your voice or video mailbox (network services,
video mailbox available only in the UMTS network),
press and hold 1 in the standby mode, and select
mailbox or Video
To change the phone number of your voice or video
mailbox, press
mailbox, a mailbox, and
124
Options
Options
Activate handset.
Options > Replace.
calls.
mailbox.
, and select Tools Utilities
>
Options Change
>
number. Enter the number (obtained from your
network service provider), and select OK.

Answer or decline a call

>
To answer the call, press the call key.
To mute the ringing tone of an incoming call, select
>
Silence.
If you do not want to answer a call, press the end key.
If you activate the
busy function in phone settings to forward calls,
declining an incoming call also forwards the call.
When you select
an incoming call, you can send a text message without
rejecting the call, informing the caller that you cannot
answer the call. Select
set up this option and write a standard text message,
select Tools
call with message.

Make a conference call

Voice
1. Make a call to the first participant.
2. To make a call to another participant, select
Options
Call
>
Call divert Voice calls
>
Silence to mute the ringing tone of
Options Send
>
Settings Phone
> > >
New call. The first call is put on hold.
>
If
>
message. To
Call Reject
>