Ordering Data; Spare Parts - FIP FLS F6.61 Manual

Correction formula for K-Factor calculation according to real internal
diameter:
K-Factor_NEW = (K-Factor x ID²) / ID_NEW²
ID = Value in the table for the internal diameter (in mm)
ID_NEW = New value for the real internal diameter (always in mm)
K-Factor = Value in the table
K-Factor_NEW = New K-Factor value for the specified internal diameter
Example:
Nominal Pipe Size (DN) = 100 mm
New Internal Diameter = 104 mm
Forumla: K-Factor_NEW = (51.02 x 100²) / 104² = 20,52

ORDERING DATA

Part No. Version
F6.61.01 Hot-tap

SPARE PARTS

Part No. Name
Magmeter
F6.KC1 Compact
mounting kit
M9.SP4.1 PG 11
F1.SP3 Isolation Valve
F1.SP5 Isolation Valve
2" to 1 1/4"
F1.SP6
Reduction
2" to 1 1/4"
F1.SP7
Reduction
F6.60M.
Electronic device
SP1.S
Magmeter flow
F3.61M.
sensor for Hot
SP01
Tap installation
18
Power Main wetted
Length
supply
12-24
615mm
VDC PVDF/316L SS
Plastic adapter with compact cap and locking nut
PG 11 complete cable gland (2 o-rings and cap)
Zinc Plated Steel 2" BS male to 1 1/4" BS female
Zinc Plated Steel 2" NPT male to 1 1/4" BS female reduction
Magmeter electronic device with 4-20mA output and freq.
Enclosure
materials
304 SS/
IP65
Description
2" Brass Ball Valve
1 1/4" Brass Ball Valve
Output /volumetric pulse output
304 SS/PVDF body
Flow Rate Weight
Range (gr.)
0.05 to 8 m/s
6000
(0.15 to 25 ft/s)
Weight
(gr.)
137
12
1800
1800
405
405
180
1000