Ordering Data; Spare Parts - FIP FLS M9.08 Manual

- Connect M9.08 to the laptop by the USB cable
- Select the item (M9.08) which appears on the navigation area
on the "FLS Calibration System" software
- Confirm FW UPGRADE and select the Updated Software
NOTE: At the end of the procedure restart the instruments in order to refresh
M9.08 software (It takes 90 seconds to refresh the SW. Please do not interrupt
the restarting process).
TO UPDATE NEW UNITS
- Download the interface software "FLS Calibration System" and the updated
software on www.flsnet.it.
- Launch the software "FLS Calibration System" on the laptop
- Push together ENTER and ESC powering the monitor
- Connect M9.08 to the laptop by the USB cable
- Select the item (M9.08) which appears on the surfing area on the software
"FLS Calibration System"
- Confirm FW UPGRADE and select the Updated Software
NOTE: At the end of the procedure restart the instruments in order to refresh
M9.08 software (It takes 90 seconds to refresh the SW.
Please do not interrupt the restarting process).

ORDERING DATA

Part Description /
No. Name
Panel mount
M9.08.P1 pH/ORP & Flow
monitor & transmitter
Wall mount
M9.08.W1 pH/ORP & Flow
monitor & transmitter
Wall mount
M9.08.W2 pH/ORP & Flow
monitor & transmitter
ACCESSORIES
Part No.
M9.KW1 Wall mounting kit
Wall mounting kit with
M9.KW2
USB cable for device
M9.KUSB

SPARE PARTS

Part No.
M9.SN1
Power
supply
12 - 24 VDC
12 - 24 VDC
110 - 230
VAC
Name
144x144mm plastic box and 110/230 VAC to 24 VDC power
power supply
interfacing
Name
Fixing snails
Wire power
Technology
3/4 wire
3/4 wire
3/4 wire
Description
144x144mm plastic box for wall installation
of all panel mount monitors
supply for wall installation of all panel mount monitors
USB cable dedicated to FLS products, 1,5 meter long
Description
2 fixing snails for panel installation of FLS monitors
Sensor
Output
Input
pH/ORP, 2*(4-20mA),
Temperature, 2*(S.S.R.),
Flow (Frequency) 2*(mech. relay)
pH/ORP, 2*(4-20mA),
Temperature, 2*(S.S.R.),
Flow (Frequency) 2*(mech. relay)
pH/ORP, 2*(4-20mA),
Temperature, 2*(S.S.R.),
Flow (Frequency) 2*(mech. relay)
15