What Peripherals Are Supported - Eurotech VIPER Quick Start Manual

VIPER / VIPER-Lite AEL Embedded Linux Dev. Kit Quickstart

What peripherals are supported?

The following peripherals/features are supported in this release:
•
Five UARTs, COM1 through COM5, including the processor's internal FFUART,
BTUART and STUART. The VIPER-Lite is only fitted with three COM ports.
•
On-board Flash array.
•
CompactFlash+.
•
Ethernet interface.
•
A variety of flat panels running with screen resolutions of 320 x 240 or 640 x 480.
•
Power management.
•
GPIO.
•
Real time clock.
•
SRAM.
•
USB client.
•
Audio codec.
VL
•
PC/104 bus. Drivers are available for a range of Eurotech Ltd and third party
VL
PC/104 boards.
•
USB host controller.
VL
•
RS-422 and RS-485 serial port support.
VL
© 2007 Eurotech Ltd Issue C
Getting started
9